Subject: FINALLY! CHANGING IMAGINES SCREEN SIZE.
Date: Mon, 23 May 94 1:04:38 EDT
From: "Steve J. Lombardi" <stlombo@eos.acm.rpi.edu>

Here are the locations to change in imagine 3.0 to run on a larger screen.
Since there is no version embedded, check your file size before maiking
this change. mine is 876412. of course you will want to back up your original
before screwing around.

There seem to be a few limitations here. If anyone can get around them, or 
does not encounter them, let me know. for instance my horizontal
screen size must be 640, 700, or 760. straying from these values causes 
bad redraws that skew to the left. vertically, I can only get 400
and 460 to work! BUMMER. 800x600 would be nice. anyway, here they are.

to change horizontal size:
edit location D063C    2BC will yield a 700 pixel wide screen. 2f8 will give
you 760.

to change vertical size:
edit location FDA9     
Note that the value you put in here must be 1/4 of the number of pixels
you want. that is 100 decimal or 64 hex will give you a 400 pixel high screen
                  115   "     "  73  "   "    "    "  " 460   "     "    "
                  130            82                     520


I could not get values greater than 460 to work! 

If anyone gets around this PLEASE POST. I'd really like to run closer
to 800X600. THANKS.

--
steve lombardi
stlombo@acm.rpi.edu



                           -=> RETURN TO CONTENTS!<=-